This Constant Voltage Multi-function RGB Controller is a universal RGB controller for
entire color changing, which adopted high-performance microchip and the most advanced
PWM (Pulse-Width Modulation) controlling technology at present. It can control all 4-pin
3-loop LED RGB full color lights. This series with RF remote controller and it is available
only within the valid range.

 

 

 

 

1. Automatically adapt to LED light which works from DC12V-24V.
2. on-off controller function
3. 3 channels RGB full color control, 4A per channel, totally 12A.

4. 17 fantastic modes such as color smooth , color skipping, horserace, strobe, etc.
5. Can choose a changing speed and brightness in a certain mode independently.
6. Can stop at static single color, speed & brightness adjustable at pause status.
7. Factory default is available.
8. Working with power repeater to expand power output unlimitedly.
9. Power loss memory function.

 

 

Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
1.reduce the risk of component damage and fire caused by short circuit, make sure correct
connection.
2.Always be sure to mount this unit in an area that will allow proper ventilation to ensure a
fitting temperature.
3.Check if the voltage and power adapter suit the controller.
(please select DC12-24V power supply with constant voltage)
4.Don’t connect cables with power on; make sure a correct connection and no short circuit
checked with instrument before power on.
5.Please don’t open controller cover and operate if problems occur.
The manual is only suitable for this model; any update is subject to change without prior
notice.

 

 

 

 

 

 

 

1. On the controller, there are 6 function keys:
ON/OFF , PAUSE , MODE+ , MODE- , SPEED+ , BRT+ , SPEED- , BRT-

 

 

 

The remote control ID learning guide: Press ON/OFF button till the light flashes,
then press PAUSE button, the light flashes again, the ID is set.

 

 

From the day you purchase our products within 3 years, if being used properly in
accordance with the instruction, and quality problems occur, we provide free repair or
replacement services except the following cases:
1.Any defects caused by wrong operations.
2.Any damages caused by inappropriate power supply or abnormal voltage.
3.Any damages caused by unauthorized removal, maintenance, modifying circuit,
incorrect connections and replacing chips.
4.Any damages due to transportation, breaking, flooded water after the purchase.
5.Any damages caused by earthquake, fire, flood, lightning strike etc force majeure of
natural disasters.
6.Any damages caused by negligence, inappropriate storing at high temperature and
humidity environment or near harmful chemicals.
7.Product has been updated.

 

 

1.Power Source Selection
Power source must be DC constant voltage type of power supply. Due to the efficient output
in some power supplies are only 80% of total, so please select at least 20% higher output
power supply than the consumption of LED lights.

 

 

Note: press MODE+, MODE-SPEED+SPEED-, BRT+, BRT- button over 3 seconds,
if LED flickers twice, it means it has restored to Default status.

 

2. Tables of changing modes